VENTAHOOD 48" Wall Mounted Range Hood - SLH30348

VENTAHOOD 48" Wall Mounted Range Hood - SLH30348 

Popular contemporary design of this wall-mount hood with soft-cut corners gives an up-to-date look. Heat lamps may also be added to selected models. Click on the models for a list of our base model numbers for standard sizes; simply select the model you need, and then specify the finish [painted, stainless steel, real brass, real copper, or hammered copper]. Recommended mounting height is 30" above the cooking surface. All Vent-A-Hood products are suitable for use in damp locations [outdoor applications such as a covered patio] when installed in a GFCI protected branch circuit.

What our Experts Think

• Powerful & Efficient Extraction: Built‑in blower delivers up to 900 CFM, clearing smoke, steam, and strong cooking odors quickly — great for everyday and high‑heat cooking.

• Magic Lung® Blower System: Proven Vent‑A‑Hood centrifugal airflow design helps move more air with less wasted suction compared to traditional systems.

• Well‑Balanced Noise: Moderate ~6.3 sones at full power — strong ventilation without excessive sound.

• Contemporary Wall‑Mounted Style: Clean, modern profile enhances kitchen design and suits larger ranges.

• Bright LED Lighting: Three integrated lights illuminate your cooktop for better visibility while cooking.

• Flexible Installation: Works with standard 10″ ducting and can be mounted at recommended heights for optimized performance.

Q&A

Maintenance Tips

• Clean Hood Surfaces Often: Wipe both interior and exterior with a soft cloth and mild, non‑abrasive detergent (warm, soapy water) to remove grease; avoid acids, abrasive pads, and harsh solvents to protect the finish.

• Grease Filter / Blower Care: Clean grease filters or traps regularly to maintain airflow and reduce fire risk; inspect blower housing for grease/dust buildup and clear any debris.

• Ductwork Inspection: Check that duct runs are free of blockages and properly sealed for optimal ventilation performance.

• Light & Hardware Check: Replace any burnt‑out bulbs and tighten mounting hardware to prevent vibration or operational issues.

• Dry After Cleaning: After wiping down, dry all surfaces to prevent water marks and help preserve the stainless steel finish.